2J4884PGF - Combi 5G NR & GNSS adhesive mount antenna

IP67/IP69 rated two cable antenna suitable for 5G NR and GPS/GLONASS applications

This 2-in-1 antenna combines enhanced mobile broadband (eMBB), high performance, ultra-reliable low-latency communication (URLLC) and navigation capabilities for the next generation MIMO devices, base station technology, carrier aggregation (CA) and global positioning systems (GPS).

Cable 1: 5GNR

Cable 1 is dedicated to 5GNR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G and 2G standards while maintaining superior mobile connectivity within 617-960, 1427-2690, 3300-5000 and 5150-5925 MHz frequencies. With omni-directional radiation pattern and linear polarization, the 2J4884PGF offers peak gains ranging from ~0.6 dBi for the higher frequency spectrum to ~3.3 dBi for the lower frequency spectrum while maintaining a stable efficiency up to 52% for 617-960 MHz frequency.


Cable 2 is designed for precision navigational devices that operate within GPS, QZSS, Galileo and GLONASS standards. Designed with hemispherical radiation pattern and right-hand circular polarization allows cable 2 to radiate on all planes and maximize connectivity by avoiding conflict with propagating signals, penetrating obstructions, reducing dead spots, boosting throughput and improve resistance to signal degradation caused by inclement weather conditions. Designed with electrostatic discharge (ESD) protection for up to 2KV and a SAW pre-filter blocking inadequate frequencies (within 1575-1606 MHz) from passing from the antenna to the receiver. Cable 2 can maintain an active gain of 28 dB @ 2.7 V and a noise figure parameter of 1.5 dB within the receiver system.


  • Cable 1: 5G NR
    • 617 - 960MHz
    • 1427 - 2690MHz
    • 3300 - 5000MHz
    • 5150 - 5925MHz
  • Cable 2: GPS/GLONASS/QZSS/Galileo
    • 1575 - 1606MHz
  • Adhesive mount
  • Ground plane independent
  • Certificates: IP67/IP69
  • Dimensions: 83 x 35 x 13.3mm
  • Customizable cables and connectors

Need advice or more information?

Why not contact the Alpha Micro sales team?

Cable 1

  • Terminals, base stations and routers
  • High traffic MIMO device connectivity
  • Industrial, commercial and residential IoT/smart home/office
  • Electrical and environmental monitoring
  • RFID asset tracking
  • HD video over LTE

Cable 2

  • Large scale transportation monitoring and tracking systems
  • Automotive and commercial vehicle tracking and telematics
  • Geo-Special asset tracking
  • First Responder and Emergency Services
  • GPS-enabled IoT applications
Order Part No. Description
AMC2J4884PGF Combi 5G NR and GNSS adhesive mount antenna. Specify cable length and connector type required

Related Products

Recently Viewed Products

Last updated: 5 November 2020